Product details

Product Description

The gap seal between the planes usually uses a solid gasket. Due to the roughness of the plane processing and the influence of the tool marks, it is uneven in the microscopic view. It is impossible for the solid liner to 100% fit the processing surface. The solid liner is aging due to temperature, medium, and mechanical force, causing looseness and leakage. Huayu series of plane sealants are single-component glues with good medium resistance, no shrinkage during curing, 100% full gaps, flexibility and shock resistance, and no leakage or leakage after long-term use.

Main Physical and Mechanical Properties

According to JB/T7311-94 standard test, the physical and mechanical properties of Huayu plane sealants are shown in the following table:

Usage Method

1. First, remove the impurities on the sealing surface, and clean the mating surface with HY755 cleaning agent.

2. Apply the sealant on one of the sealing surfaces to form a closed rubber ring, and apply glue around the bolt holes.

3. Within 20 minutes after applying glue, align and close the assembly, wipe off the excess glue, and seal the smaller pressure immediately.

4. If you need to adjust the gap and add gaskets, you should apply glue on both sides of the gasket at the same time, and then assemble.

Matters Needing Attention

1. The anaerobic glue is cured under hypoxia, so the maximum sealing gap cannot be exceeded. It is also not suitable for plastics, pure oxygen or oxygen-rich media, and not suitable for sealing strong oxidizing materials.

2. Silicone glue absorbs moisture and solidifies. Unused products should be sealed and stored.

3. After curing, the glue is a safe and non-toxic substance. Avoid contact with skin before curing. Children are strictly prohibited from playing.

4. Store in a cool and dry place, with a shelf life of 9 months.