HY620High viscosity Retaining Compound for Cylindrical Parts
The anaerobic cylindrical parts retaining agent is a single-component glue that can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of the retaining agent can replace the interference and transitional fits with clearance fits, which can effectively prevent the deformation caused by the transitional fits.
Product details
Product Introduction
The anaerobic cylindrical parts retaining agent is a single-component glue that can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of the retaining agent can replace the interference and transitional fits with clearance fits, which can effectively prevent the deformation caused by the transitional fits.
HY609: General purpose, low viscosity, high strength, suitable for interference, transition and clearance fits.
HY620: High viscosity, high strength, suitable for use under high temperature conditions. It’s used to hold valve sleeves, core sleeves, valve sleeves, cylinder sleeves, keyways, etc.
HY680: Medium viscosity, high strength, suitable for clearance fit or transition fit. Hold sleeves, pulleys, gears, rotors, etc.
Repair shaft-hole fittings and out-of-tolerance parts.
HY688: Special sealing and retaining agent for engine bowl plug.
Packing specification
50ml/bottle, 250ml/bottle
Product Paramenters
The anaerobic cylindrical parts retaining agent is a single-component glue that can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of the retaining agent can replace the interference and transitional fits with clearance fits, which can effectively prevent the deformation caused by the transitional fits.
HY609: General purpose, low viscosity, high strength, suitable for interference, transition and clearance fits.
HY620: High viscosity, high strength, suitable for use under high temperature conditions. It’s used to hold valve sleeves, core sleeves, valve sleeves, cylinder sleeves, keyways, etc.
HY680: Medium viscosity, high strength, suitable for clearance fit or transition fit. Hold sleeves, pulleys, gears, rotors, etc.
Repair shaft-hole fittings and out-of-tolerance parts.
HY688: Special sealing and retaining agent for engine bowl plug.
Packing specification
50ml/bottle, 250ml/bottle
Product Paramenters
| Model | HY609 | HY620 | HY680 | HY688 |
| Rubber color | Green | Green | Green | Green |
| Density (g/cm3) | 1.05 | 1.05 | 1.05 | 1.05 |
| Viscosity (mPa.s) | 100~300 | 6000~10000 | 1000~1500 | 10000~15000 |
| Positioning time (min) | 10~30 | 20~40 | 10~30 | 20~40 |
| Full curing time (h) | 24 | 24 | 24 | 24 |
| Shear strength (MPa) | 20 | 21 | 25 | 20 |
| Maximum sealing gap (mm) | 0.10 | 0.3 | 0.2 | 0.3 |
| Operating temperature (℃) | -55~150 | -55~210 | -55~150 | -55~150 |
| Typical application | Process assembly | Temperature resistant type | Repair assembly | Bowl plug assembly |
